PRECIS support forum http://forum.precisrcm.com/ |
|
ATD not available http://forum.precisrcm.com/viewtopic.php?f=1&t=52 |
Page 1 of 1 |
Author: | gkebede12 [ Sun Nov 16, 2014 7:03 pm ] |
Post subject: | ATD not available |
Hi There, Precis did not respond to run experiment after the completion its installation. there is instruction in the forum believed under common error in precis which says "To activate the at daemon, go into your Linux distro's control panel (control center / yast / etc) and look for some thing that says run-level editor. " at " should be somewhere in that list" advised to enable or check it so the problem will solve. Following the instruction, I got the location where i suppose to check or enable ATD. in that list ther is no ADT at all. to check it I typed at now and then ctrl D: warning: commands will be executed using /bin/sh at> <EOT> job 8 at Sun Nov 16 00:25:00 2014 Can't open /run/atd.pid to signal atd. No atd running? On my other suse v12.3 desk top computer ATD is there but not enabled, precis is working fine. It is a little bit strange. How ever is there a way to correct this and make it work? I am using my laptop for data analysis using precis . Please if you can help, I really do appreciate it. Girma |
Author: | sotucker [ Mon Nov 17, 2014 3:16 pm ] |
Post subject: | Re: ATD not available |
Dear Girma, The answer will be dependent on the particular Linux installation you have. Hopefully you should be able to find your answer if you read the manual for your particular Linux installation or search using Google All the best, Simon |
Author: | gkebede12 [ Mon Nov 17, 2014 3:53 pm ] |
Post subject: | Re: ATD not available |
I think by doing, code #ATD at now >ctr D it seems like running. But I saw "status : running (2x2 PEs, NRUN" which does not go any where and no error message. I think i should come back to it after downloading the sst files and test it. Girma |
Author: | dmhg [ Mon Nov 17, 2014 8:43 pm ] |
Post subject: | Re: ATD not available |
Girma, In OpenSUSE 12.3 Open a terminal, then su - yast2 Navigate to System then System Services (Runlevel) Near the top you should see atd Click on Enable so that it says Yes in the Enabled column Click Ok Choose Yes when it says "Save changes to Runlevel?" Now PRECIS should start. David |
Author: | gkebede [ Mon Nov 17, 2014 10:32 pm ] |
Post subject: | Re: ATD not available |
Hi Dave, I checked that there is no ATD. But as you see below, on my other suse 12.3 descktop computer,Yes its in System Service (Runlevel) list. Its not even enabled. The laptop in the same list there is no ATD at all. alsasound Yes* │Set up ALSA sound system atd No* │Start AT batch job daemon autofs No │automatic mounting of filesystems avahi- daemon Yes │ZeroConf daemon avahi- dnsconfd No │ZeroConf daemon cifs No │Import remote SMB/ CIFS (MS Windows) file systems cpufreq Yes │CPUFreq modules loader cron Yes │Cron job service cups Yes │CUPS printer daemon dbus Yes │D-Bus is a message bus system for applications to talk to one another. dnsmasq No │Starts internet name service masq caching server (DNS) My problem is with failed to update ancillary files when I tried to run Erain. I posted with the .leav file. Please look in to it and let me know what is missing so I can move on with the analysis. Thanks Girma │ |
Author: | dmhg [ Tue Nov 18, 2014 12:00 pm ] |
Post subject: | Re: ATD not available |
Hi Girma, For the ERAIN error (failed to update ancillaries) you need to download and unzip the ancillaries identified in another thread. Put them in $ANCIL_MASTER. If atd doesn't appear on the services list, you might need to install it and then enable it. http://software.opensuse.org/package/at David |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |