PRECIS support forum

It is currently Thu Mar 28, 2024 5:34 pm

All times are UTC




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: ATD not available
PostPosted: Sun Nov 16, 2014 7:03 pm 
Offline

Joined: Tue Oct 28, 2014 6:27 pm
Posts: 15
Hi There,
Precis did not respond to run experiment after the completion its installation. there is instruction in the forum believed under common error in precis which says "To activate the at daemon, go into your Linux distro's control panel (control center / yast / etc) and look for some thing that says run-level editor. " at " should be somewhere in that list" advised to enable or check it so the problem will solve.
Following the instruction, I got the location where i suppose to check or enable ATD. in that list ther is no ADT at all. to check it I typed at now and then ctrl D:
warning: commands will be executed using /bin/sh
at> <EOT>
job 8 at Sun Nov 16 00:25:00 2014
Can't open /run/atd.pid to signal atd. No atd running
?
On my other suse v12.3 desk top computer ATD is there but not enabled, precis is working fine.
It is a little bit strange. How ever is there a way to correct this and make it work? I am using my laptop for data analysis using precis .
Please if you can help, I really do appreciate it.

Girma


Top
 Profile  
 
 Post subject: Re: ATD not available
PostPosted: Mon Nov 17, 2014 3:16 pm 
Offline

Joined: Thu Mar 27, 2014 5:03 pm
Posts: 73
Dear Girma,

The answer will be dependent on the particular Linux installation you have. Hopefully you should be able to find your answer if you read the manual for your particular Linux installation or search using Google

All the best,
Simon

_________________
Simon Tucker
Met Office Hadley Centre


Top
 Profile  
 
 Post subject: Re: ATD not available
PostPosted: Mon Nov 17, 2014 3:53 pm 
Offline

Joined: Tue Oct 28, 2014 6:27 pm
Posts: 15
I think by doing,

code
#ATD
at now
>ctr D
it seems like running. But I saw "status : running (2x2 PEs, NRUN" which does not go any where and no error message. I think i should come back to it after downloading the sst files and test it.

Girma


Top
 Profile  
 
 Post subject: Re: ATD not available
PostPosted: Mon Nov 17, 2014 8:43 pm 
Offline

Joined: Thu Feb 06, 2014 12:29 pm
Posts: 118
Girma,
In OpenSUSE 12.3

Open a terminal, then

su -
yast2
Navigate to System then System Services (Runlevel)
Near the top you should see atd
Click on Enable so that it says Yes in the Enabled column
Click Ok
Choose Yes when it says "Save changes to Runlevel?"

Now PRECIS should start.

David


Top
 Profile  
 
 Post subject: Re: ATD not available
PostPosted: Mon Nov 17, 2014 10:32 pm 
Offline

Joined: Thu Jun 05, 2014 10:03 am
Posts: 12
Hi Dave,

I checked that there is no ATD. But as you see below, on my other suse 12.3 descktop computer,Yes its in System Service (Runlevel) list. Its not even enabled.
The laptop in the same list there is no ATD at all.
alsasound Yes* │Set up ALSA sound system
atd No* │Start AT batch job daemon
autofs No │automatic mounting of filesystems
avahi-
daemon Yes │ZeroConf daemon
avahi-
dnsconfd No │ZeroConf daemon
cifs No │Import remote SMB/ CIFS (MS Windows) file systems
cpufreq Yes │CPUFreq modules loader
cron Yes │Cron job service
cups Yes │CUPS printer daemon
dbus Yes │D-Bus is a message bus system for applications to talk to one another.
dnsmasq No │Starts internet name service masq caching server (DNS)

My problem is with failed to update ancillary files when I tried to run Erain. I posted with the .leav file. Please look in to it and let me know what is missing so I can move on with the analysis.

Thanks
Girma │


Top
 Profile  
 
 Post subject: Re: ATD not available
PostPosted: Tue Nov 18, 2014 12:00 pm 
Offline

Joined: Thu Feb 06, 2014 12:29 pm
Posts: 118
Hi Girma,

For the ERAIN error (failed to update ancillaries) you need to download and unzip the ancillaries identified in another thread. Put them in $ANCIL_MASTER.

If atd doesn't appear on the services list, you might need to install it and then enable it.

http://software.opensuse.org/package/at

David


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC


Who is online

Users browsing this forum: Google [Bot] and 52 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group